SewperCoat PG® is specifically formulated for the “wet-shotcrete” application method. This installation equipment is typically a low-pressure progressive cavity (rotor/stator) type pump. This formulation is ideal for confined spaces due to its low pressure and minimal rebound characteristics. Material should be installed in accordance with standard industry practice as defined by ACI 506 – Specifications for Materials, Proportioning, and Application of Shotcrete.

Strong-Seal High Performance Mix® is a pure fused calcium aluminate mortar that stops infiltration and restores structural integrity. It has been specifically designed for protection against microbiologically induced corrosion. Laboratory and field tests have proven that the unique mineralogy of Strong-Seal® High Performance Mix protects cement sewer structures from MIC attack by limiting the bacterial activity which regulates biosulfuric acid production and the resulting pH level.

AV-202 Multigrout® is a single component, moisture activated MDI/TDI blended polyurethane injection resin. Designed for sealing active water leaks in large cracks or joints in concrete structures, it can absorb up to 12 times its weight in water creating a tough, impermeable foam or gel with superb adhesive qualities. Multigrout reacts freely with water in a wide range of proportions to form a strong film, gel or foam according to the mix design requirements of the application.

SealGuard II® is highly reactive dual component hydrophobic polyurethane with a 1 to 3 second reaction time. It is designed to stop rapid (>50 gpm) water flows into concrete or other underground structures. SealGuard II is hydrophobic, so it will not shrink. Our patented check-valve in the static mixer allows a partially used tube set to be re-used.

Uroflex® is a truly unique hybrid epoxy coating- 100% solid, medium to high build, urethane-modified-epoxy (UME) coating and liner enhanced with novolac. Uroflex is a urethane‐modified‐epoxy (UME) coating, incorporating novolac resin for enhanced chemical resistance and crosslinking. Uroflex is formulated “green” and environmentally friendly.

Series 66HS® is a high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.